Tips For Replacing a Window Handle
It is easy to change your window handle in the convenience of your own home. Follow these handy tips for smooth operation and a stunning look.
Start by removing the screw covers to reveal the screws within your uPVC window handle. Then, measure the length of the spindle to ensure that you receive the right size replacement.
1. Take a measurement of the length of the Spindle.
When you're replacing a window handle, it's important to get the size of the spindle right. This is because it can determine how tight or loose the handle is and whether it will lock correctly within the window frame. The spindle is a metal shaft that connects the handle and to the lock within the window frame. The spindle is available in the standard 8mm cross-section for industry or older versions that measure 9mm. The modern industry standard is 8mm, but this was not always the case. When buying a new handle it's essential to check the dimensions.
Take repairmywindowsanddoors off. This is easily done by turning the handle into the open position and unscrewing two screws that hold the handle in place (which are often hidden behind plastic caps which must be removed). After the handle is removed, take a measurement from the base to the end. This will provide you with the measurements you need to buy a replacement.
There are a variety of options when you are looking to pick the perfect window handle. From sleek chrome that fits into a modern home to traditional burnished bronze that looks great in restored Georgian rooms, or even the more quaint Tudor cottages with curled mongoose-tail latches. There are a lot of options, but the most important is to choose a style that matches your home's style.
Espag handles are commonly fitted to uPVC window frames and are always the exact same size with a 43mm central. Cockspur handles are available in a variety of sizes, starting at 58mm up to 62mm. Window handles from Cadenza come in an entirely different dimension due to their angle blade that operates a multi-point lock mechanism inside the window.
When selecting a window handle, you should also consider the hand you use to open your door. Inline window handles aren't hand-operated and can be used on right or left handed windows. Cranked window handles are hand-operated and are only used on windows that open in only one direction.
2. Remove the Handle
If the handle is damaged or simply worn out the handle of a window that falls off can be a real pain. The good news is that you can replace the uPVC handle by yourself. You only need some basic hand tools and some time to complete the process.
First, you have to open the window and make sure that it is in the unlocked position. Then, remove the screws that hold the handle in place. Once these are removed, you can begin to work on removing the handle itself.
The handle itself is attached to a spindle in the window frame. Based on the type it is held in place by a screw or a pin. The most common handles are the inline Espagnolette and the cockspur handles. Both kinds of handles are found on casement windows including aluminium ones. The handles can be locked by using a key to stop unauthorised access from outside. Or you can lock the handles by turning them clockwise.
To take the handle off, you will require a flat-bladed screwdriver. After this is released, the handle will fall off the spindle. After the handle has been removed, you will need to measure the length of the spindle in order to ensure that your new handle is compatible with this size.
Once you have the right size, you can screw the new handle in place. You must make sure that the new handle is securely secured and that it is turning in the correct way (clockwise for open, or counterclockwise for closed). It is also crucial to check that it has not been installed upside down.
Replace the cap screws. After you've completed this step, you can test your handle to make sure it is working correctly. You can also test the locking system by moving the handle from the unlocked position to the locked position and back.
3. Remove the Screws
A uPVC window handle is an essential element of any home and is usually the first thing to exhibit signs of wear and wear or damage. This could be due to natural elements or by frequent use, and sometimes malicious damage caused by opportunistic criminals who may want to open a closed window and gain entry to your home. However, a simple repair can easily solve the problem and stop the problem from happening again.
uPVC handles could also be difficult to remove when the locking mechanisms are not working correctly. In most cases, the issue can be solved by replacing the multipoint lock, rather than the entire handle, and it's definitely worth a look as it can save you money.
After you have removed the handle, you'll have to take off any screws that were holding it in place. They're usually on the inside of the base of the handle. You may require a screwdriver for this and it's essential to not over tighten the screw as this could cause the handle to loosen.
Then you will need to locate the screws or pins that keep the handle in place. They will likely be located on the inside of the handle base and you will need to use an screwdriver or a pair of pliers to take them off them. After you have removed them, you'll need to replace the caps on screws should you choose to do so and test the new handle to make sure it's functioning properly.
Install the handle by aligning the spindle to the cutout in the window mechanism. Then, screw it into. Make sure the handle is in an open position and that the screws are secured before replacing the screws' covers, should you wish to do so. Once you've completed this, you're done and can enjoy your new window handle. Hopefully this will help you to avoid the need for expensive replacement of your door and window in the future. Contact us if you require more information about this or any other aspect of your uPVC window.
4. Install the new handle
Whether you're replacing a broken handle or simply updating it, the process is surprisingly simple and can be completed in a matter of a few steps. The key is to identify the type of handle, measure its spindle and identify the tools you'll require to complete the task. Safety is always the primary priority when working with windows and tools. Make sure you follow the steps and make sure that you have an appropriate handle for use.
The first step is to identify the screws that hold your existing window handle and take them out, while maintaining an adequate grip on the handle itself to stop it from falling and injuring yourself. After the screws have been removed and repositioned, they can be put in a secure location to be replaced later.
After the handle that was used previously was removed, you can now begin to fit your new handle. It is essential that the handle is fitted perfectly to ensure it works properly and locks the window in place. The next step is to slide the square metal bar on the back of the handle into the hole in the window mechanism, making sure it is secure.
The last step is to replace the caps on the screws and then test the handle to make sure it is working. If you're not happy with the results, or the window doesn't open or close correctly Contact our experts for assistance.
Most UK homes have uPVC Windows. As such, many will need to be changed at some point because of wear and tear or breakage. Anyone with some DIY expertise can accomplish the task. It is crucial that the handle you use is in line with the style and size of the window. If you're not sure about the kind of handle you'll need, feel free to reach out to our team, who can provide you with the possibilities available.